View as

  • MikroTok R11e-5HacT Router

    The new AC standard is here, with up to 1.3Gbps datarate and 256-QAM modulation, and 80MHz channels. 802.11ac opens up new possibilities and speeds never possible before.

  • MikroTik R11e-5HacD Router

    R11e-5HacD is our new 802.11ac card in miniPCI-express format, perfect for any RouterBOARD with miniPCIe slot, such as RB953, RB912, RB922, RB800 or x86 devices with RouterOS.

  • MikroTik CA433U Router

    Indoor case (3 holes for Nfemale Bulkhead connectors or Swivel antennas and hole for USB). This new revision is slightly higher, to fit more miniPCI card models. Ships with different faceplate stickers, to match used ports.

  • MikroTik RBGPOE-CON-HP Router

    This device allows use of any 48V PoE source (including Passive PoE, Telecom PoE, 802.3af and 802.3at) to power RouterBOARD devices. Simply plug any 48V PoE powered ethernet cable into one port, and any 8-30V capable RouterBOARD device into the other. This device is capable to provide high power output - up to 24W (up to 1A at 24V).

  • D-Link DWR-M961 Router

      • Part No: DWR-M961
      D-Link’s DWR-M961 E1 4G CAT6 AC1200 LTE Router allows you to access mobile broadband networks from anywhere. Once connected, you can check e-mail, surf the web, stream media and make phone calls. Use your carrier’s SIM/UICC card to share your 3G/4G Internet connection through a secure wireless network or by using any of the four Gigabit ports.

  • Ezviz CS-CMT-Battery-A

      • Model: Ezviz CS-CMT-Battery-A
      • Availability: In Stock
     
      • Part No: CS-CMT-Battery-A
     
      • Devices always seem to run out of juice at the wrong moment, but when it comes to a home security network there’s never a good time to be out of power. With an additional battery for EZVIZ C3A wire-free cameras, you can be sure to keep every inch of your castle under constant surveillance.
      • This long-life, 5500mAH rechargeable unit can last up to 3 months from a single charge, giving you a handy spare just in case you need an emergency replacement.

  • Ezviz CS-CMT-CHARGER

      • Model: Ezviz CS-CMT-CHARGER A
      • Availability: In Stock
     
      • Part No: CS-CMT-CHARGER A
      EZVIZ Dual-battery Charging Dock, support charge two EZVIZ batteries (BL-BC-01) for C3A battery camera at the same time, Dual LED indicator, red means charging, green means full charged. Micro USB in-terface, easy to use. Multiple power protection technology, very safe.

  • Ezviz CS-BW2824-B1E10

    Specification
    • F-numbers F 2.2
    • App compatibility Yes
    • Camera type Bullet camera
    • Channels 8
    • Max. viewing angle hor. 103 °
    • Built-in memory 1 TB
    • Recording mode Movement detection , Alarm , Manual , Preset
    • Sensor size 9.4 mm (1/2.7")
    • Sensor type CMOS
    • Features 2-way communication , Speaker , Microphone , ONVIF support , Saves footage on SD card
    • Wi-Fi standard IEEE802.11b , IEEE802.11g , IEEE802.11n
    • IR range (max.) 30 m
    • Memory expansion up to 6 TB
    • Outputs HDMI , VGA
    • Used at Outdoors
    • Receiver size 235 x 270 x 44.5 mm
    • Transmitter dimensions 71,64 85,80 150,44 x x mm
    • Operating temperature -30 ºC to 60ºC
    • Frequency 2.4 GHz
    • Transfer type Wi-Fi

  • Ezviz CS-BW2424-B1E10

      • Part No: CS-BW2424-B1E10
      HDMI and VGA interface Adaptable for a variety of monitor, support 1080P video playback Enhanced Wi-Fi, Never dropping - Video transmission oriented optimized Wi-Fi performance - Quick set up with Wi-Fi IP camera -Anti-drop line - Cover radius in open environment can be 100 meters One key connect and fast configuration Supporting multi cameras access with one key, view the link status of cameras and other terminals.

  • Ezviz CS-BW2424-B1E10

     
      • Model: Ezviz CS-BW2424-B1E10
      • Availability: In Stock
     
      • Part No: CS-BW2424-B1E10
      HDMI and VGA interface Adaptable for a variety of monitor, support 1080P video playback Enhanced Wi-Fi, Never dropping - Video transmission oriented optimized Wi-Fi performance - Quick set up with Wi-Fi IP camera -Anti-drop line - Cover radius in open environment can be 100 meters One key connect and fast configuration Supporting multi cameras access with one key, view the link status of cameras and other terminals.

  • Ezviz CS-X5C-8EU/1T

    • Ezviz CS-X5C-8EU/1T

    Ezviz CS-X5C-8EU/1T

      • Brands Ezviz
      • Model: Ezviz CS-X5C-8EU/1T
      • Availability: In Stock
      • Part No: CS-X5C-8EU/1T
      • SECURE LOCAL RECORDING - Record from up to 8 Wi-Fi cameras at the same time with continuous/scheduled/motion detection modes. Supports 1TB to 6TB HDD storage (not included)
      • ENHANCED Wi-Fi - Optimised wireless performance for video transmission, covering a radius of up to 100 meters in an open environment, with strong wall penetrating Wi-Fi
      • EASY PLAYBACK - Supports 4 channel playback at 1080P and 8 channels at 720P resolution. Also view recordings or live footage from your PC, tablet or smartphone remotely with end to end encryption.

  • Ezviz CS-X5C-4EU/1T

      • Part No: CS-X5C-4EU/1T
     
      • EZVIZ Vault Live.NVR / Video recorder. Supports access for up to 4 wireless cameras or wired cameras. Wireless range up to 100 meters (without obstacles or interference). Support 2.4Ghz and 5Ghz Wi-Fi frequency.
      • Support to access HD IPC and repeaters. Integrated 1TB hard drive. Hard drive up to 6T, 24/7 continuous recording. Support for the EZVIZ cloud service, remote reading via mobile phone, tablet or PC. HDMI & VGA output.

  • Ezviz CS-X5S-8W

    • EZVIZ CS-X5S-8W is EZVIZ’s latest wireless network video recorder that can support up to 8 cameras. Use it to protect your business with 24/7 recording and storage of video streams or to store family videos at home.
    • It has a built-in HDMI and VGA interface for all your monitors. Connect up to 8 cameras: the Vault Live records the video simultaneously.
    • The Wi-Fi connection has been optimized for video transmission and guarantees a stable connection up to 100 metres and through 3 walls - making it the ideal solution if you want to cover a large area.

  • Ezviz CS-X5S-4W

      • Brands Ezviz
      • Model: Ezviz CS-X5S-4W
      • Availability: In Stock
     
      • Part No: CS-X5S-4W
     
      • The EZVIZ X5S (X5S-4W) video recorder  is equipped with Wi-Fi to provide you with an efficient and effective recording of your surveillance cameras on a daily basis.
      • This model is capable of supporting 4 Wi-Fi IP cameras up to 5 megapixels and stores more sequences thanks to the H.265 compression format.

  • Grandstream GWN7000

    Ideal for the enterprise, small-to-medium business, retail, education, hospitality and medical markets, the GWN7000 supports comprehensive WiFi and VPN solutions that can be shared across one or many different physical locations.

  • MikroTik PL7510Gi

    PWR-LINE PRO (PL7510Gi) is a smart accessory to your existing network for places, where your signal or your cable is unable to reach. Usually data over power-lines would be capped at 100 Mbps, but with PWR-LINE PRO you can reach speed up to 600 Mbps!  

  • MikroTik PL7400

    PL7400 is designed for MikroTik products with microUSB port, like hAP mini or hAP lite. Connect PL7400 to your electrical outlet and then connect the USB cable to power your supported MikroTik device. When doing the same with another PWR-LINE compatible device somewhere further in your premises, the devices will form a 100Mbit (max) connection without needing to install any LAN cables.

  • MikroTik PL6400

    PL6400 is designed for MikroTik products with microUSB port, like hAP mini or hAP lite. Connect PL6400 to your electrical outlet and then connect the USB cable to power your supported MikroTik device. When doing the same with another PWR-LINE compatible device somewhere further in your premises, the devices will form a connection without needing to install any LAN cables.

  • MikroTik PL7411-2nD

    The PWR-Line AP is a small Wi-Fi access point, made as an accessory to your existing network, for places, where your signal or your cable is unable to reach. Unit comes with Type C power plug (commonly used in Europe, South America & Asia).

  • MikroTik PL6411-2nD

    The PWR-Line AP is a small Wi-Fi access point, made as an accessory to your existing network, for places, where your signal or your cable is unable to reach.

  • MikroTik RBLHGG-60adkit

    The Wireless Wire Dish is a ground breaking solution which offers Fiber speed and quality on distances up to 1500 m for a fraction of the price! This amazing kit makes a secure AES encrypted 60 GHz wireless link that is not affected by the crowded WiFi spectrum, offering a stable and fast link for distances of 1500 meters or more. Simply point the included devices at one another and power them on, they are already preconfigured to connect automatically and will make a 2 Gb/s aggregate link.

  • MikroTik RBwAPG-60adkit

    The Wireless Wire makes secure AES encrypted 60 GHz wireless link that is not affected by the crowded WiFi spectrum, offering a stable and fast link for distances of 200 meters or more. The box includes two wAP60G devices that are already paired together, a wall mounting kit, straps for pole mounting and also a pair of table stands for using the devices indoors. The link will even work through most windows, depending on their material.

  • MikroTik RBLHGG-60ad

    LHG 60G – a high-speed 60 GHz CPE point-to-multipoint unit, perfect solution for crowded wireless spectrum. LHG 60G offers a simple and effective 60 GHz solution for wireless connection where the 2 GHz and 5GHz wireless space is crowded and unreliable. Connect up to eight of these units to a 60 GHz access point, such as our wAP60G AP or wAP 60Gx3 AP, and enjoy the smooth connection with data rate up to 2 Gbps.

  • MikroTik RBLHG-60ad

    The LHG Lite60 is a new model in our 60 GHz lineup. This is a low cost CPE unit for connecting to a 60 GHz AP at longer distances, enabling you to build a cost effective point to multipoint setup in the clean 60 GHz wireless spectrum. Connect up to eight of these CPE units to a 60 GHz access point, such as our wAP60G AP. For links up to 800 meters, this is the best alternative for wireless connections where 2 and 5 GHz wireless space is crowded and unreliable, at a fraction of the cost. Also, it's possible to make point-to-point link with two LHG Lite60.

  • MikroTik RBSXTsq-60ad

    The SXTsq Lite60 is a new model in our 60 GHz lineup. This is a low cost CPE unit for connecting to a 60 GHz AP, enabling you to build a cost effective point to multipoint setup in the clean 60 GHz wireless spectrum. Connect up to eight of these CPE units to a 60 GHz access point, such as our wAP60G AP.

  • MikroTik RBwAPG-60ad

    The wAP 60G is weatherproof integrated 60 GHz wireless unit, that can be used indoors or outdoors as Point-to-Point or CPE unit The box includes a wall mounting kit, straps for pole mounting, power supply, PoE injector and also table stand for using the device indoors. Penetrates some windows depending on material. wAP 60G connects to 60 GHz AP for distances of 200m+

  • MikroTik RBwAPG-60ad-A

    The wAP 60G AP is weatherproof integrated 60 GHz wireless unit, that can be used indoors or outdoors in different scenarios - Base Station, Point-to-Point or CPE. The box includes a wall mounting kit, straps for pole mounting, power supply, PoE injector and also table stand for using the device indoors. Penetrates some windows depending on material.

  • MikroTik RBwAPG-60ad-SA

    The wAP 60Gx3 AP is a new access point model for the 60 GHz spectrum. Compared with the regular wAP 60G AP, this new model has a completely new antenna array, with support for a much wider angle of coverage and is optimized specifically for multipoint operation. The 96 antenna elements work with beamforming technology to provide connectivity for up to eight 60 GHz client devices at the same time, in a 180 degree field of view. Build a cost effective point to multipoint setup in the clean 60 GHz wireless spectrum, at a fraction of the cost.

  • MikroTik RB912UAG-6HPnD-OUT

    The BaseBox 6 in an outdoor wireless device, based on our popular RB912 model, fitted with two SMA connectors for antennas, and a cable hood for protection against moisture. Designed to use as an 6GHz AP with our 6GHz CPEs, like DynaDish 6 and SXT 6.

  • MikroTik RBDynaDishG-6HnD

    The Dynadish 6 uses the same effective antenna design and enclosure as our successful 5 GHz model, but this new device operates in the licensed 6GHz frequency. This means less interference than the often saturated 5 GHz frequencies for higher speed and more reach.

  • MikroTik RBSXTG-6HPnD

    SXT 6 is our first product for licensed 5.9-6.4GHz frequency. Equipped with RouterOS Level 4 license and 28 degree Dual Chain 16dBi antenna, unit can be used as Base Station or CPE, as well as two of them can be used to create Point-to-Point link.

  • MikroTik RBLDF-2nD

    The LDF (Lite dish feed) is an outdoor wireless system with a built in antenna, meant to be installed on satellite offset dish antennas. The dish will act as a reflector, amplifying the signal. This means you can use any available satellite TV dish with an offset mount to quickly deploy powerful long range wireless links. The offset mount is universal at 40 mm diameter, and the LDF can easily be placed inside it. Since the LDF itself is a tiny little package, it makes shipping and deployment simple and low cost.

  • MikroTik RBLDF-5nD

    The LDF (Lite Dish Feed) is an outdoor wireless system with a built in antenna, meant to be installed on satellite offset dish antennas. The dish will act as a reflector, amplifying the signal. This means you can use any available satellite TV dish with an offset mount to quickly deploy powerful long range wireless links. The offset mount is universal at 40mm diameter, and the LDF can easily be placed inside it. Since the LDF itself is a tiny little package, it makes shipping and deployment simple and low cost.

  • MikroTik RBOmniTikU-5HnD

    OmniTIK is a weatherproof outdoor AP with dual-polarized omni antennas - the perfect companion for our SXT, or for any other 802.11 standard device. Weatherproof, durable and ready to use. It has five 10/100 Ethernet ports, PoE support and a built-in 802.11a/n wireless radio. It supports Nv2 TDMA technology with up to 200Mbit aggregate throughput. LED signal indicators on it’s back are fully customizable, show Ethernet activity or wireless signal - or any other information from RouterOS.

  • MikroTik RB912UAG-5HPnD-OUT

    The RB912 in an outdoor enclosure, fit with two RPSMA connectors for antennas, and a cable hood for protection against moisture. Also available are three additional places for antenna connectors, in case you wish to use the RB912 miniPCIe slot for one more wireless interface to make a dual band device.

  • MikroTik RB912UAG-2HPnD-OUT

    The BaseBox2 is an outdoor 2.4Ghz wireless device, based on our popular RB912 model, fitted with two SMA connectors for antennas, and a cable hood for protection against moisture. Also available are three additional places for antenna connectors, in case you wish to use the BaseBox miniPCIe slot for one more wireless interface to make a dual band device, or a 3G/4G modem.

  • MikroTik RBGrooveA-52HPn

    Our smallest outdoor series model - a fully featured wireless RouterBOARD powered by RouterOS. Weatherproof, durable and ready to use. It has one 10/100 Ethernet port with PoE support and a built in wireless radio. It has software selectable 2 or 5GHz wireless mode, and high output power! GrooveA has also supports AP mode. With the Nv2 TDMA technology, up to 125Mbit aggregate throughput is possible! It has a built-in N-male connector, and pole attachment points, so you can attach it to an antenna directly, or use a standard antenna cable. LED signal indicators make it easy to install and align.

  • MikroTik RBGroove-52HPn

    Our smallest outdoor series model - a fully featured wireless RouterBOARD powered by RouterOS. Weatherproof, durable and ready to use. It has one 10/100 Ethernet port with PoE support and a built in wireless radio. It has software selectable 2 or 5GHz wireless mode, and high output power! With the Nv2 TDMA technology, up to 125Mbit aggregate throughput is possible! It has a built-in N-male connector, and pole attachment points, so you can attach it to an antenna directly, or use a standard antenna cable. LED signal indicators make it easy to install and align. Box contains: Groove unit, mounting loops, PoE injector and power adapter.

  • MikroTik RB911G-5HPnD-QRT

    The QRT 5 is a rugged outdoor flat panel antenna, with a built in RouterBOARD. The device has a 24dBi antenna and a high power 5GHz wireless transmitter. Inside is the high power RB911 dual chain wireless device (see separate brochure), with high performance, high output power wireless transmitter. It has a Gigabit Ethernet port, to fully utilise the benefit of 802.11n high speed wireless. Easy to use and quick to deploy, QRT is ideal for point to point links.

  • MikroTik RB911G-2HPnD-12S

    mANTBox 2 12s is long range 12dbi 120 degrees integrated Base Station for 2.4 GHz. The mANTBox is based on our new mANT sector antennas, but also has a wireless router built right in. Powered by the RB911 device, the mANTBox comes ready to use with everything included. The device uses a high speed 600 MHz CPU, comes with the Gigabit Ethernet port and has a built in 802.11 b/g/n wireless device with up to 30 dBm output power.

  • MikroTik RBQRTG-2SHPnD

    The QRT-2 is rugged outdoor flat panel antenna, with a built in RouterBOARD. The device has a 17dBi antenna and a super high power 2Ghz wireless transmitter. Inside is a new dual chain wireless device, with high performance, high output power wireless transmitter, and a Gigabit Ethernet port, to fully utilize the benefit of 802.11n high speed wireless.

  • MikroTik RBSXTG-2HnD

    We are glad to introduce our first complete AP/CPE for 2.4GHz - SXTG2HnD! It's powerful 60 degrees 2x2 MIMO 10dbi sector antenna with wireless on-board. Unit is equipped with Gigabit Ethernet port, so customers can take full advantage of dual chain MIMO. It has the same form factor as our popular 5Ghz SXT model. Package contains SXTG-2HnD, mounting loops, PoE injector, power adapter.

  • MikroTik RBLHG-2nD-XL

    The Light Head Grid (LHG) is a compact and light wireless device with an integrated dual polarisation grid antenna at a revolutionary price. It is perfect for point to point links or for use as a CPE. LHG XL 2 is equipped with 21 dBi grid antenna for longer distances.

  • MikroTik RBLHG-2nD

    The Light Head Grid (LHG) is a compact and light 2.4 GHz 802.11b/g/n wireless device with an integrated dual polarization 18 dBi grid antenna at a revolutionary price. It is perfect for point to point links or for use as a CPE at longer distances and supports Nv2 TDMA protocol.

  • MikroTik RBSXTsq2nD

    The SXTsq Lite2 is a compact and lightweight outdoor wireless device with an integrated antenna. Perfect for point-to-point links or as a CPE unit. It is compact, weatherproof and easy to mount.

  • MikroTik RBSEXTANTG-5HPnD

    The SEXTANT is a 18dBi 5GHz antenna with a built in RB911G router. It has two polarizations to give you all benefits of 2x2 MIMO in 802.11n. Inside is the high power RB911 dual chain wireless device, with high performance, high output power, and a Gigabit Ethernet port, to fully utilize the benefit of 802.11n high speed wireless. Easy to use and quick to deploy, SEXTANT is ideal for point to point links.

  • MikroTik RBSXTG-5HPnD-SAr2

    SXTG-5HPnD-SAr2 is a low cost, high speed 5GHz outdoor wireless sector access point. It has a 90 degree antenna to provide a wider coverage than our previous SXT units. Complete with a ready to mount enclosure and built-in 14dBi antenna, the package contains everything you need to set it up in a matter of minutes. The inside of the case is covered in special shielding to improve operation in high interference areas and antenna front to back ratio.

  • MikroTik RBLHG-5HPnD-XL

    The LHG XL HP5 is a 5GHz 802.11 a/n wireless device with an integrated dual polarization 27 dBi grid antenna and high TX output power, designed to reach up to 40km in point-to-point setups at full speed. The grid design ensures protection against wind, and the fact that the antenna element is built into the wireless unit means no loss on cables.

  • MikroTik RBLHG-5HPnD

    The LHG is a compact and light 5GHz 802.11 a/n wireless device with an integrated dual polarization 24.5 dBi grid antenna. LHG HP5 comes with two times more output power than our regular LHG 5, and is designed to reach up to 60% longer distances. The grid design ensures protection against wind, and the fact that the antenna element is built into the wireless unit means no loss on cables.

  • MikroTik RBLHG5kit

    The LHG 5 is a compact and light 5GHz 802.11 a/n wireless device with an integrated dual polarization 24.5 dBi grid antenna at a revolutionary price. It is perfect for point to point links or for use as a CPE at longer distances and supports Nv2 TDMA protocol. The grid design ensures protection against wind, and the fact that the antenna element is built into the wireless unit means no loss on cables.