Specification
Technical Specifications
Standard
IEEE 802.11b/g/n on 2.4 GHz
Memory Capacity
Memory: 64 MB
Flash Memory 16 MB
Antenna
2 External Detachable Omni-Directional Antennas
5 dBi on 2.4 GHz
Physical Interface
2 x 10/100 Fast Ethernet Ports
1 x Reset Button
LED Indicators
1 x Power
WLAN (Wireless Connection)
2.4 GHz
2 x LAN
Power Source
PoE injector (EPA2406GP)
100V~240V AC, 50-60Hz
0.4A @ 120V AC
Surge Protection: 1KV
ESD Protection
Contact: 4KV
Air: 8 KV
Mounting
Wall Mount
Pole Mount
Ingress Protection Marking
IP55-Rated Enclosure
Wireless & Radio Specifications
Operating Frequency
2.4GHz
Operation Modes
Access Point
Repeater
Client Bridge
WDS: AP, Bridge
Frequency Radio
2.4GHz: 2400MHz ~ 2835MHz
Transmit Power
Up to 26 dBm on 2.4 GHz
Max transmit power is limited by regulatory power
Radio Chains/Spatial Streams
2×2:2
Supported Data Rates (Mbps)
2.4 GHz: Max 300
802.11b: 1, 2, 5.5, 11
802.11g: 6, 9, 12, 18, 24, 36, 48, 54
802.11n: 6.5 to 300 (MCS0 to MCS15)
Supported Radio Technology
802.11b: Direct-Sequence Spread-Spectrum (DSSS)
802.11n: Orthogonal frequency-division Multiplexing (OFDM)
Channelization
802.11n with 20/40 MHz channel width
802.11b/g with 20 MHz channel width
Supported Modulation
802.11b: BPSK, QPSK, CCK
802.11n: BPSK, QPSK, 16-QAM, 64-QAM
Environmental & Physical
Temperature Range
Operating: -4°F to 140°F, -20°C to 60°C
Storage: -22°F to 176°F, -30°C to 80 °C
Humidity (Non-condensing)
Operating: 90% or less
Storage: 90% or less
Device Dimensions & Weights
ENS202EXT Device
Weight: 0.66 lbs.
Width: 3.93″ (100 mm)
Length: 7.08″ (186 mm)
Height: 1.14″ (29 mm)
Package Contents
– ENS202EXT Outdoor AP
– PoE Injector (EPA2406GP)
– Pole Mount Ring
– Mounting Screw Set
– Quick Installation Guide
– 2 External Detachable Omni-Directional Antennas